Graphite sheet vs. thermal pad
Understand spreading versus gap-filling roles before selecting by conductivity alone.
Engineering resources
Short guides for better component decisions
Use these practical starting points to prepare a stronger RFQ and avoid specifying a material before the assembly conditions are understood.
Material data should be tied to a named grade and test method. System performance requires assembly validation.
Open guide
Foam selection for camera modules
Start with mass, frequency, installed compression, rebound and alignment—not color or feel.
EMI contact at controller seams
Ground path and compression often matter as much as the shielding material.
PET vs. PI insulation
Compare operating temperature, thickness, dielectric need, forming and cost at the selected grade.
LiDAR sealing inputs
Opening geometry, airflow, adhesive surface and assembly validation define the correct stack.
Before requesting a quote
Six inputs that make recommendations useful
- Installation position and function
- 2D drawing or 3D envelope
- Gap, thickness and compression
- Temperature and environment
- Required material evidence or test
- Prototype and annual volume
Engineering review
Start with your drawing and engineering constraints
Tell us the installation position, material challenge, environment and project stage. Our team will review the drawing and recommend a practical construction.