product
Thermal Graphite Sheets
Thin, shaped heat spreaders for flight controllers, ESCs, robot processors and compact electronics where lateral heat movement and low profile matter.
ExploreProduct families
Custom converted products, ready for assembly
Explore custom die-cut graphite, thermal pads, shielding materials, foams, insulation films, mesh and vent membrane constructions.
Every recommendation is reviewed against geometry, construction and assembly conditions.
product
Thermal Silicone Pads
Die-cut thermal interface pads for controllers, ESCs, batteries and power modules where an uneven gap must be bridged with controlled compression.
Explore
product
Conductive Fabric Tape
Custom conductive fabric adhesive parts for local shielding, seam coverage and grounding contact in UAV and robotic electronics.
Explore
product
Conductive Foam Gaskets
Compressible fabric-over-foam gaskets that combine conductive contact and mechanical compliance at electronic enclosure interfaces.
Explore
product
Camera & Sensor Foam Pads
Custom foam pads and gaskets for vibration control, cushioning, spacing, sealing and anti-rattle functions around cameras, LiDAR and sensors.
Explore
product
EVA & Silicone Foam Cushion Pads
Die-cut cushioning, spacing and anti-rattle pads for battery bays, gimbals, flight controllers and robotic electronics exposed to assembly variation or vibration.
Explore
product
PET Protective Films
Temporary or assembly-stage protective film parts for robot and UAV housings, camera covers, display surfaces and handling-sensitive components.
Explore
product
Battery Compression Pads
Die-cut foam and silicone pad constructions for spacing, cushioning and controlled contact within customer-designed UAV and mobile-robot battery assemblies.
Explore
product
Aerogel Thermal Barriers
Thin, lightweight aerogel-based insulation parts considered for space-constrained UAV and robotic battery or power assemblies where thermal separation is required.
Explore
product
PET & PI Insulation Parts
Precision die-cut and adhesive-backed films for dielectric isolation, wrapping and barrier functions in dense electronic and battery assemblies.
Explore
product
Dust Mesh & Vent Membranes
Die-cut mesh, membrane and adhesive-frame constructions for robot and UAV vents, microphones, speakers, cameras and sensor housings.
ExploreA better RFQ
What makes a useful engineering brief?
- Drawing or installation envelope
- Part position and function
- Gap, thickness and compression
- Temperature and environment
- Target validation or test
- Prototype and annual quantity
Engineering review
Start with your drawing and engineering constraints
Tell us the installation position, material challenge, environment and project stage. Our team will review the drawing and recommend a practical construction.