Solution

Vibration Control & Cushioning Components

Precision foam and silicone parts that cushion camera, gimbal, sensor, battery and electronics assemblies without consuming unnecessary space.

Upload your drawing See selection inputs

FLEXCEND cleanroom production floor with multiple precision converting lines

Grade-specific performance is supplied with the recommended material. Final assembly validation remains application-specific.

The engineering risk

Why the material alone is not the answer

Vibration, shock and tolerance variation can shift optics, stress PCBs, create rattle or damage connectors. Foam selection must account for compression, recovery, density, thickness and long-term set.

Common install positions

Camera and gimbal
LiDAR and sensor module
PCB and connector support
Battery cell or pack spacer
Housing anti-rattle point

How the construction works

Match each function to the assembly.

Controlled compression

Pad thickness and material are selected around the installed gap.

Energy absorption

Foam and silicone structures help cushion shock and repeated vibration.

Alignment support

Die-cut geometry supports repeatable placement around optics and sensors.

Sealing support

Closed-cell constructions can also support dust and water control at interfaces.

Selection data

What we need to review your design

Send the information available now. Missing values can be identified during drawing review rather than guessed.

Installed gap
Target compression
Vibration or shock condition
Temperature
Recovery and set requirement
Adhesive and assembly method

Engineering questions

Before you specify the part

Is softer foam always better for camera isolation?

No. The right response depends on supported mass, compression, frequency, geometry and alignment requirements.

Can samples be produced from several densities?

Candidate constructions can be converted for fit and assembly evaluation before production tooling is finalized.

Engineering review

Review a vibration & cushioning challenge with our engineers

Tell us the installation position, material challenge, environment and project stage. Our team will review the drawing and recommend a practical construction.