Solution

Dust, Water & Environmental Protection Components

Custom mesh, vent membranes, foam gaskets and adhesive seals for outdoor robot, drone, LiDAR and sensor housings.

Upload your drawing See selection inputs

FLEXCEND cleanroom production floor with multiple precision converting lines

Grade-specific performance is supplied with the recommended material. Final assembly validation remains application-specific.

The engineering risk

Why the material alone is not the answer

Outdoor equipment needs airflow, pressure equalization or acoustic transmission while limiting contamination. Assembly-level protection depends on housing design, compression, adhesive bond and validation; no ingress rating should be claimed from a membrane or gasket alone.

Common install positions

Pressure-equalization vent
Microphone or speaker opening
LiDAR and camera window perimeter
Housing seam
Air inlet and dust screen

How the construction works

Match each function to the assembly.

Particle screening

Precision-cut mesh helps control dust and debris at openings.

Venting

Hydrophobic membrane constructions can support pressure equalization.

Perimeter sealing

Foam gaskets create a compressible interface around housings and windows.

Adhesive integration

Liners, pull tabs and registration features support controlled assembly.

Selection data

What we need to review your design

Send the information available now. Missing values can be identified during drawing review rather than guessed.

Opening geometry
Airflow or acoustic requirement
Target contaminant
Water exposure
Surface and adhesive
Compression and validation plan

Engineering questions

Before you specify the part

Does a membrane guarantee an IP rating?

No. Ingress performance is an assembly result influenced by housing, adhesive bond, compression, vent design and validation.

Can mesh and adhesive be supplied as one part?

Yes. Multi-layer die-cut constructions may include mesh or membrane, adhesive frame, liner and assembly tabs.

Engineering review

Review a environmental protection challenge with our engineers

Tell us the installation position, material challenge, environment and project stage. Our team will review the drawing and recommend a practical construction.